MIL-T-52698A
ANSI/UL-583 - Standards for Safety (Power-Operated Industrial Trucks).
(Application for copies should be addressed to Underwriters Laboratories, Inc., 161 Avenue of the Americas, New York, NY 10013; 207 East Ohio Street, Chicago, IL 60611; or 1655 Scott Lane, Santa Clara, CA 95050.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
Guide to NEMA Standards Publication - Motors and Generators. (Application for copies should be addressed to the National Electrical
Manufacturers Association, 155 East 44th Street, New York, NY 10017.)
(Nongovernment standards and other publications are normally available from the organizations which prepare or which distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, (except for associated detail specifications, specifications sheets or MS standards), the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The walkie straddle truck (hereinafter referred to as "truck") shall be driven by an electric motor with an industrial battery as a power source. It shall consist of: two straddle legs, a tiering mast, and a manual T-shaped steering handle with controls incorporated on the handle.
3.2 First article. Unless otherwise specified (see 6.2), a sample shall be subjected to first article inspection (see 4.3 and 6.3). Any changes or deviations of trucks from the approved first article during production will be subject to the approval of the contracting officer. Approval of the first article will not relieve the contractor of his obligation to furnish trucks conforming to this specification.
3.2.1 Certificates of compliance. When specified (see 6.2), or upon request, a certificate of compliance with the requirements of this specification shall be furnished. Back-up data to support the certificate of compliance may be requested by the contracting officer for review. The certificate of compliance shall read as follows:
This certifies that the (component, part or assembly) complies with all provisions and requirements of specification paragraph . The certificates shall be signed by a duly authorized agent of the contractor.
3.3 Material. Material shall be as specified herein. Materials not specified shall be selected by the contractor and shall be subject to all provisions of this specification.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business