MIL-T-52698A
operable condition. The check-out test shall include-traveling (forward and reverse); steering (clockwise and counterclockwise); lifting and lowering rated load; and braking in both horizontal and vertical handle positions. Inability of the truck to perform any function specified shall constitute failure of this test.
4.3.2.16 Rain protection. Test the truck in accordance with test method No. 11. Evidence of moisture in instruments or controls or inability to perform any normal function shall constitute failure of this test.
4.4 Quality conformance inspection.
4.4.1 Sampling. Sampling for examination and tests shall be in accordance with MIL-STD-105.
4.4.2 Examination. Samples selected in accordance with 4.4.1 shall be examined as specified in 4.3.1. The inspection level shall be level II with an AQL of 1.5 percent defective for major defects and 4.0 percent defective for minor defects.
4.4.3 Tests.
4.4.3.1 Samples. Samples selected in accordance with 4.4.1 shall be tested as specified in 4.3.2.1 through 4.3.2.14. The inspection level shall be S-1 with an AQL of 4.0 percent defective for all defects.
4.4.3.2 Individual. Each truck not tested as specified in 4.4.3.1 shall be tested as specified in 4.3.2.15. Failure of the test shall be cause for rejection.
4.5 First article demonstration report. The contractor shall prepare and submit the first article demonstration report to the contracting officer for approval within the time frame specified (see 6.2). The report shall include a detailed description of the examination and demonstration performed. All deficiencies encountered and actions taken to correct the deficiencies shall be included.
4.6 Inspection of packaging. Inspection of preservation, packing, and marking for level A shall be in accordance with MIL-STD-162. Commercial preservation, packing and marking shall be examined for conformance to ASTM D
3951 and the requirements specified herein.
5. PACKAGING
5.1 Preservation, packing and marking. Preservation, packing, and marking shall be level A or commercial as specified (see 6.2).
5.1.1 Level A. Level A preservation, packing, and marking shall be in accordance with the level A requirements for type II of MIL-STD-162.
5.1.2 Commercial. Commercial preservation, packing, and marking shall be in accordance with ASTM D 3951. Additionally, each exterior container shall be marked with the cube and gross weight.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business