MIL-T-52953C APPENDIX
i. When the truck reaches the portion of the course marked "M", the operator shall stop. On every other lap, the operator shall turn off the master switch, then turn "ON". After completion of this portion of the test, proceed along the rain aisle and start the next cycle. All stops shall be at the maximum safe deceleration rate. The operator shall actuate and release the parking brake at least once during each circuit.
j. The truck shall then reenter the portion of the course marked "A".
In portions "A", "B","C", and "D", the procedure shall be the same as described in preceding paragraphs, except that the truck shall place
a test load at each point where it was previously indicated that the truck picked one up, and pick up a load whom it was previously indicated one was placed. Maneuvers in the balance of the course beyond the portion marked "D" shall be the same as described in preceding paragraphs.
k. One-half of the total number of laps shall be traversed in the opposite direction with all operation reversed accordingly. This may be accomplished after completion of each 8-hour operating day or multiple thereof. That is, 50 percent of the laps shall be accomplished in the clockwise direction and 50 percent in the counterclockwise direction or vice versa. The test course need not
be rearranged for the reverse travel.
1. "The Hourly Time Record Sheet" shall be filled out for each operating hour of the performance test. Average lap speed per hour shall be recorded.
m. Maintenance and inspections shall be performed in accordance with the maintenance service and inspection sheet.
28
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business