MIL-T-52864-SUP Trucks, Lift, Fork: Diesel-Engine-Driven, Pneumatic-Tired, 10,000, 15,000 and 20,000 Pound Capacity; General Specification for No S/S DocumentThis specification covers the general requirements for diesel-engine-driven pneumatic-tired depot forklift trucks used for handling cargo in and around warehouses, loading platform, and docks.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51

MIL-T-52864D

DRAWINGS

TACOM

12276986          - Kit, M16 Rifle Mounting.

(Copies of drawings required by contractors in connection with specific acquisition functions should be obtained from the USA Tank Automotive Command, ATTN: AMSTA-M, Warren, MI 48397-5000.)

DEPARTMENT OF LABOR (DOL)

29CFR1910 - Occupational Safety and Health Administration.

(Application for copies should be addressed to a local DOL officer or the

Superintendent of Documents, US Government Printing Office, Washington, DC

20402).

THE MILITARY TRAFFIC MANAGEMENT COMMAND/(MTMC/TEA)

- Pamphlet 70-1-Transportability for Better Strategic Mobility. (Application for copies should be addressed to:  The Military Traffic

Management Command Transportation Engineering Agency (MTMC/TFA), ATTN: MTT-TR, P.O. Box 6276, Newport News, Va. 23606-0276.)

TECHNICAL INFORMATION PACKAGE (TIP) TIP-52864

(Application for copies should be addressed to the Commanding Officer, US Army Belvoir Research, Development and Engineering Center, ATTN:  STRBE-FM, Fort Belvoir, Virginia 22060-5606.)

2.2  Other publication.  The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DoDISS specified in the solicitation.  Unless otherwise

specified, the issues of documents not listed in the DoDISS shall be the issue of the non-Government documents which is current on the date of the solicitation (see 6.2).

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

B 56.1 - Safety Standard for Powered Industrial Trucks.

B 56.11.3 - Load Handling Symbols for Powered Industrial Trucks.

(Application for copies should be addressed to the American Society of

Mechanical Engineers, 345 East 47th Street, New York, NY 10017.) AMERICAN NATIONAL STANDARDS INSTITUTE INC. (ANSI)

Z 26.1 - Safety Glazing Materials for Glazing Motor Vehicles Operating on

Land Highways.

3