MIL-T-52864D
(Application for copies should be addressed to the Tire and Rim
Association, Inc., 3200 West Market Street, Akron, OH 44313.) UNDERWRITERS LABORATORIES INC. (UL)
UL 558 Standard for Industrial Trucks, Internal Combustion Engine-Powered.
(Application for copies should be addressed to Underwriters Laboratories
Inc., 333 Pfingsten Road, Northbrook, IL 60062.)
(Non-Government standards and other publications are normally available
from the organizations which prepare or which distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, (except for specifications sheets), the text of this document shall take precedence. Nothing in this document, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The truck shall be a diesel-engine-driven, front wheel drive, rear wheel steer, forklift truck. The truck shall be the manufacturer's current commercial product and shall have been in production, marketed and in use for a minimum of one year preceding the solicitation for
procurement. The introduction of product improvement changes in this one year period is acceptable.
3.2 First article. Unless otherwise specified (see 6.2), a sample shall be subjected to first article inspection (see 6.3) in accordance with 4.3.
3.3 Material. Materials shall be as specified herein. Materials not specified shall be selected by the contractor and shall be subject to all provisions of this specification.
3.3.1 Material deterioration prevention and control. The forklift truck shall be fabricated from compatible materials, inherently corrosion resistant or treated to provide protection against the various forms of corrosion and deterioration that may be encountered in any of the applicable operating and storage environments to which the forklift truck may be exposed.
3.3.2 Dissimilar metals. Dissimilar metals shall not be used in intimate contact with each other unless protected against galvanic corrosion. Dissimilar metals and methods of protection are defined and detailed in MIL- STD-889.
3.3.3 Identification of materials and finishes. The contractor shall identify the specific material, material finish or treatment for use with component and subcomponent, and shall make information available upon request to the contracting officer or designated representative.
3.3.4 Recovered material. For the purpose of this requirement, recovered materials are those materials which have been collected from solid waste and
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business