MIL-T-52864-SUP Trucks, Lift, Fork: Diesel-Engine-Driven, Pneumatic-Tired, 10,000, 15,000 and 20,000 Pound Capacity; General Specification for No S/S DocumentThis specification covers the general requirements for diesel-engine-driven pneumatic-tired depot forklift trucks used for handling cargo in and around warehouses, loading platform, and docks.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51

MIL-T-52864D

TEST METHOD NO. 4

SPEED

1. Test Course:

Test course shall be a dry, level surface of sufficient length to attain specified speed prior to entering measured distance, plus measured distance, plus sufficient stopping distance.

2. Test Procedure:

a. Operate the truck at governed speed with rated load in carry position.

b. Drive the truck a sufficient distance to attain specified speed prior to entering the measured test course.

c. Record length of measured distance, time to traverse measured distance. Measured distance shall be equal to or greater then 22 feet.

d. Repeat for a total of six runs, three in each direction for each range, except only time measurement is required. Repeat total of six runs in reverse gear, three in each direction for each range, except only time measurement is required. Travel speed in each gear shall be the average of the six runs.