MIL-T-52864-SUP Trucks, Lift, Fork: Diesel-Engine-Driven, Pneumatic-Tired, 10,000, 15,000 and 20,000 Pound Capacity; General Specification for No S/S DocumentThis specification covers the general requirements for diesel-engine-driven pneumatic-tired depot forklift trucks used for handling cargo in and around warehouses, loading platform, and docks.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51

MIL-T-52864D

(Application for copies should be addressed to the American National

Standards Institute, 1430 Broadway, New York, NY 10017.)

SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)

SAE	J53	- Minimum Performance Criteria for Emergency Steering
		of Wheeled Earthmoving Construction Machines.
SAE	J96	- Flashing Warning Lamp for Industrial Equipment.
SAE	J154	- Operator Enclosures Human Factor Design
		Considerations.
SAE	J180	- Electrical Charging Systems for Construction and
		Industrial Machinery.
SAE	J185	- Access Systems for Off-Road Machines.
SAE	J198	- Windshield Wiper Systems, Trucks, Buses, and
		Multipurpose Vehicles.
SAE	J209	- Instrument Face Design and Location for Construction
		and Industrial Equipment.
SAE	J297	- Operator Controls on Industrial Equipment.
SAE	J534	- Lubrication Fittings.
SAE	J537	- Storage Batteries.
SAE	J541	- Voltage Drop for Starting Motor Circuits.
SAE	J551	- Performance Levels and Methods of Measurements of
		Electromagnetic Radiation from Vehicles and Devices
		(20-1000 MHz).
SAE	J585	- Tail Lamps (Rear Position Lamps).
SAE	J586	- Stop Lamps for Use on Motor Vehicles Less Than 2032
		mm in Overall Length.
SAE	J598	- Sealed Lighting Units for Construction and
		Industrial Machinery.
SAE	J614	- Engine and Transmission Dipstick Marking.
SAE	J759	- Lighting Identification Code.
SAE	J833	- USA Human Physical Dimensions.
SAE	J845	- 360 Degree Warning Lamp for Authorized Emergency,
		Maintenance and Service Vehicles.
SAE	J898	- Control Locations for Off-Road Work Machines.
SAE	J899	- Operator's Seat Dimensions for Off-Road Self-
		Propelled Work Machines.
SAE	J917	- Marine Push-Pull Control Cables.
SAE	J925	- Minimum Service Access Dimensions for Off-Road
		Machines.
SAE	J985	- Vision Factors Considerations in Rear View Mirror
		Design, Information Report.
SAE	J1152	- Braking Performance - Rubber-Tried Construction
		Machines.
SAE	J1362	- Symbols for Controls, Indicators, and Tell-Tales for
		Off Road Self-Propelled Work Machines.

(Application for copies should be addressed to the Society of Automotive

Engineers, 400 Commonwealth Drive, Warrendale, PA 15086-0001.) TIRE AND RIM ASSOCIATICH, INC. (TRA)

Tire and Rim Association Yearbook